| LENGTH OF CAR: | |
| face to face of couplers: | 37' 9'' |
| over striking plates: | 35' 3 7/8'' |
| over end sills | 34' 6'' |
| wheel base of car (total) | 28' 4'' |
| WIDTH OF CAR: | |
| over side sills: | 6' 0'' |
| clearance width over-all, Spreader: | 9' 8 3/4'' |
| clearance width over-all, Ditcher: | 10' 10'' |
| TRUCKS: | |
| spread of truck frame: | 6' 5'' |
| type: | Arch Bar Frame, huntoon Bolster |
| wheel diameter: | 33' |
| journal dimensions: | (A.R.A. Arch Car Type) 5 1/2'' x 10'' |
| wheel base: | 5' 4'' |
| COUPLER: | |
| type: | A.R.A. Type "D" Coupler 6'' x 8'' |
| height @ center of coupler: | 2' 10 1/2'' |
| DRAFT GEAR: | |
| Miner Friction A-2-S | |
| BRAKE EQUIPMENT: | |
| Westinghouse | Type "C" 10'' x 12'' |
| HAND BRAKE: | |
| 16'' Wheel | |
| WING: | |
| length (center of wing hinge to tip): | 23' 1'' |
| width: | 3' 2'' and 5' 2'' |
| area: | 83' 0'' sq. ft |
| width of wing spread (each wing): | @ 22'' below top of rail: 21' 0'' |
| @ level with top of rail: 21' 6'' | |
| @ 14'' above top of rail: 83' 0'' | |
| vertical travel of wing: | above top of rail: 14'' |
| below top of rail: 22'' | |
| AIR TANKS: | |
| dimensions: | 4' 0'' x 6' 0'' |
| capacity | 75 cu. ft. |
| train line pressure required | 70 p.s.i. |
| CAPACITY: | |
| draw bar push: | 100,000 lbs |
| WEIGHT OF CAR: | |
| Standard Spreader: | 85,000 lbs. |
