SAWMILL

#23796

INTERFACE REQUIRED: Position sawmill near the track. Typical receiving car is gondola. Wooden planks are loaded into the side of the building in preparation to the activation.

ACTION PERFORMED: When button is pushed the half log on a carriage moves from the far right of the device toward the left in front of the turning saw blade simulating cutting. When the log stops on the far left a wooden plan is ejected from the building behind the log representing the plank that was just cut. As the saw returns to the right of the device, a man with a crane left comes down and picks up the plank. He then carries it out away from the shed to a spot over the car and drops in inside the waiting gondola while the log makes another pass at the saw creating the next plank for pickup.