Support this website by joining the Silver Rails TrainWeb Club for as little as $1 per month.
Click here for info.
This website has been archived from TrainWeb.org/freemoslo to TrainWeb.US/freemoslo.
Free-mo SLO
Standards & Recommended Practices
Revision History
Free-mo Standards & Recommended Practices
Standards & Recommended Practices FAQ Page
Free-mo Module
Variations |
April 2006 - Draft 1.6
-
Polishing up and cleaning up the numbering.
-
Added legend
-
moved the RPs into the body
-
added a glossary section.
-
added "S"s to all the Standard numbers
-
other minor edits.
July 2005
-
Renumbered the FAQs
-
Re-organized the sections into a more
logical order.
-
Replaced the use of "mainline" with
"through route" except where taking about a Mfsainline module vs. a
Branchline module.
-
Add 5.1.2 Turnout controls shall be on
all side of the module.
NOTE: Some of the section Numbers have changed. The Section
Numbers listed below may not still be correct.
2004 April
2004 March 12
-
A number of small grammatical
corrections.
-
3.2.2 & 3.3.2 Minimum track changed from
code 55 to code 40, per Chris.
-
Added a number of FAQs.
-
Branchline and Mainline are capitalized
everywhere now.
-
Mini-mo is consistent.
-
Added to the introduction to include the
concept that a module can have "one or more" ends.
-
2.1.7 Changed "have infinite adjustment"
to "have continuous adjustment"
-
2.1.9 Changed "rail" to "railhead"
-
3.1.6 "Turnouts on the MODULE through
route" added the word module.
-
3.1.8 "the two track CENTERLINES shall be
spaced" added the word centerlines.
-
3.2.3, 3.3.3 added the word approximately
2004 March
-
Replaced the use of "End" with
"Endplate".
-
1.0 changed "pieces" to "sections".
-
1.1.3 - reworded.
-
2.1.1 - Added FAQ
-
2.1.5, 2.4.2 change "stand alone" to
"stand on its own"
-
2.4.1 typo fixed: "recomme" should be
"recommended"
-
3.1.3 reworded for clarity.
-
3.1.10 moved to 7.3
-
3.2.6 change "should" to "shall", bolded
"Class Ia"
-
3.3.6 change "should" to "shall", Bolded
"Class I"
-
3.4.1 changed "should" to "shall"
-
4.1.3 changed "#18" to "18 AWG"
-
4.1.4 changed "#24" to "24 AWG", reworded
to match 4.1.3
-
4.1.9, 4.1.12 put "6 position 6
conductor" in quotes
-
4.1.7, 4.1.8 added "or equivalent"
2004 February
-
Reformatted the standards into the
numbered section format.
-
3.1.6 added recommendation for #8 turnout
on the through track
-
Added 3.2.2 and 3.3.2 - Allowance for
smaller track on sidings and spurs
-
Added section index
|
Page Last
Updated 04/19/2007 |
Support this website by joining the Silver Rails TrainWeb Club for as little as $1 per month.
Click here for info.